Error message

Warning: preg_match(): Allocation of JIT memory failed, PCRE JIT will be disabled. This is likely caused by security restrictions. Either grant PHP permission to allocate executable memory, or set pcre.jit=0 in drupal_valid_http_host() (line 736 of /home/liuzhengdong/



  • Images transmitted in real-time with latency less than 1 millisecond
  • Fully uncompressed, high definition images with embedded sound
  • Automatically detects HD-SDI and SD-SDI video
Transmission Distance: at least 300m in open space
Transmission Latency: ≤1ms
Frequency: 5.1-5.9GHz, Manual Mode
Tally and Intercom Support: Yes
Transmitter: 1 HD/SDI input, 1 HD/SDI Loop through output (Audio Embedded)
Receiver: 1 HDMI output, 2 HD/SDI output (Audio Embedded)
Supported Format: 1080P, 1080/23.98Psf, 1080i, 720p, 576i, 480i
Power Supply: Battery, DC 6-17V
Size: TX: 87mm(L)×33mm(W)×140mm(H)
RX: 168mm(L)×34mm(W)×125mm(H)
Weight: TX: 1.15Lbs, RX: 2.14Lbs



Capacity: 180Wh
Voltage: 14.8v
Weight: 3 lbs
Size: 3.8" x 5.87" x 2.75"
Nominal Runtime (85W): 2.1 hours
  • All-purpose power supply that features high load discharge of 12 Amps
  • Meets the power requirement of ARRI ALEXA
  • 4 Stage LED Power Gauge
  • Integrated P-Tap on the side of the battery allows you to power any 12vdc device from this port
  • Internal protection circuits monitor cell balance, temperature, over charge and over discharge to insure safe and proper operation
  • Shock absorbing non-slip shell to protect the battery pack



Designed from the ground up for wireless transmitting HD images from any HDV camera to field monitors, is ideal for live real-time viewing in professional quality, with a latency of less than 1 millisecond. The director, producer and even film crew can see exactly what the camera is shooting in real-time. The transmission is uncompressed for the highest quality and encrypted for safety.

  • Images transmitted in real-time with latency less than 1 millisecond
  • Fully uncompressed, high definition images with embedded sound
  • HDMI input/output
Input voltage: Battery / DC 12-17V
Power consumption: 20W (max.)
Transmission Distance: 90m in open space
Transmission Latency: ≤1ms
Transmitter: 1 HDMI input, 1 HDMI Loop through output
Receiver: 2 HD/SDI output, 1 HDMI output
Supported Format: 480i/576i NTSC/PAL, 1080i/720p


XP-L70V Photo

Capacity: 70Wh
Voltage: 14.8v
Weight: 0.64Kg
Size: 159 x 85 x 50mm
  • Work with GP-DV-S/SE/P/C or GP-EX-S to supply power for 7.2V or 14.4V DV camera to extend runtime
  • Can also be used and charged as normal brick battery
  • The quick release plate can be used to install wireless receiver, hard drive or other equipments, can also be used to connect 2 batteries physically (no circuit connect) so one battery for camera and another for other equipments
  • Power Tap socket built in
  • Both sides have 1/4” 20 mounting holes reserved for installing other equipments
  • 4 Stage LED Power Gauge display, offers an accurate reading of capacity in 25% increments
Subscribe to Professional Solution RSS